Bronze Version - Modding Kits for AE-1200/1300 & WS-1600/1700 Series

Due to inevitable outcome, part of the engraved lettering is now changed to "ILLUMINATION".

Hope you can understand.

          INSTALLATION TUTORIAL:

          SPECS:

• FKM Rubber Source Supplier: Daikin Chemicals Japan
• Case and Button Material: CNC milled CuSn8 Bronze (Buttons pre-installed)
• Glass: Sapphire (Pre-installed)
• Case Diameter: 42.2mm (Without Buttons)
• Weight: 97.8g (Rubber Band, Buckle and Module Installed)
• Weight: 75.4g (Case with Module Installed)
• Weight: 22.4g (Rubber Band with Buckle)
• Thickness: 13mm (Before Assembly)
  
• Band Width: 18mm (Flare out to 25mm)
• Buckle Width: 19mm (Tongue: 3mm)
• Band Thickness: 2.6mm
• Band Weight: 22.4g (With Buckle)
• Band Length: 130mm+80mm
• Wrist Circumference(Rubber): 14cm - 21cm
• Lug to Lug: 45mm
• Lug Width: 18mm

          COMPATIBILITY:

• Casio AE-1200/1300 Series Modules
• Casio WS-1600/1700 Series Modules
• Casio DW-291H Series Modules

          CONTAINING:

• Solid bronze casing (Wrapped in foam pouch)
• FKM based rubber band (Optional, depends on order)
• Screwdriver (Flat-head-1.5MM*1/2.0MM*1, Phillip-1.5MM*1)
• Caseback screws (Do not use excessive force to maneuver)
• Cushion pad (For assembly upon)
• FKM based rubber gaskets

          MEASUREMENT:

FKM stands for Fluoroelastomer, which is a class of man-made rubber of great density but soft in touch. Our DAI-EL FKM rubber bands and many accompany accessory are specifically made by Daikin.

Able to offer exceptional resistance to wide range of industrial chemicals. Such as acids, oils, and fuels. With their strong carbon-fluorine bonds and low gas permeability, these materials are able to withstand harsh environments and maintain their integrity in low to high temperature conditions. Range from -45 °C to +204 °C.

Most importantly, resistance to oil and sweat in consumer grade product such as this. Soft, flexible, non-reactive materials which will not degrade in long term usage.

Attentions:

This product is only compatible for Casio AE-1200/1300 & DW-291H Series.

Hence, please check for the make and model thoroughly before purchasing.

The lettering can be engraved then painted with many color or lume.

Or none at all, being a completely sterile case.

Engraving see the below as reference.

This a case only listing, does not include caseback and module.

Please prepare your own AE-1200/1300 series caseback.

Buttons are pre-installed by default, if you want to customize them as well.

Please contact us first and see if it's possible. (Buttons are bronze by default)

Presented module is not included. Please use original caseback and module on our modding kit.

Please avoid using chemical solution to accelerate patina forming and removing.

For it might deform or corrode the gaskets within buttons under accidental or improper procedures.

Or further more, ruining the bronze material permanently.

And in such sitaution, we are not responsible for the product's after-sales service.

For possible patina formed during transportation.

You may try using coke or ketchup to let the case fully submerge.

Till the surface stain or marks are removed. Or to a degree you satisfied.

But don't forget sealing if off with installing caseback first.

Afterwards, wash off excess material under running water.

There is also a method using baking powder and lemon juice to create a paste.

Then use a toothbrush to brush off any patina you don't want.

To have a fresh start to cultivate new patina at any given moment.

Mind that this is not a defect, patina is a natural reaction for this particular case material. 

And if you are worried or does not like the effect, please do not purchase.

Because it WILL have patina forming one way or another at certain point.

Customization such as painting on lettering, will take longer time than expected.

Depends on the difficulty, it will range from 1 to 2 working weeks till finishing.

Shipping label will be created first. Meanwhile, please be patient with the process. 

Lastly, except for quality issues, customized orders are not allowed to refund or return.

Unless stated otherwise, pin buckle color remian to be rose gold color.

There will be a dummy caseback attach to casing in the kit.

As a protective layer also to prove the screws can be successfully attached.

A measure to many customers reckless installing without following our instructions.

Therefore lead to broken screws and render the kit useless. Which we do not hold responsibilities. 

Please carefully uninstall it and attach either SKXMOD or original caseback back on.

(There might be slight color difference among different accessory and case under same colorway.)

(Due to many variating factor: manufacturing method, material, design and more.)

(Also factor in that we make our own spray painting. Please take into consideration.)

(The term of "Gold" and "Silver" merely represents the colorway.)

(Not meaning coated or made out of true precious metal.)

(Necessary tools and parts are included in the packaging)

This product is not manufactured by Apple, Seiko, Casio or related brands.

It is made by SKXMOD.

A third-party product to accessorize aforementioned brands and more.