Customized Modding Kits for AE-1200/1300 & WS-1600/1700 Series

Due to inevitable outcome, part of the engraved lettering is now changed to "ILLUMINATION".

Hope you can understand.

          INSTALLATION TUTORIAL:

          COATING TORTURE TEST:

         SPECS:

• Case Material: 316L Stainless Steel (Buttons Pre-installed on cases)
• Bracelet: 316L Stainless Steel (Milled Clasp and Swivel Joint Screws) 
• Coating: IP Coated, Rated over 980HV on Vickers Hardness Test (Bracelet: Also Coated & Sand-Blasted Matte)
• Coating Colors: Only Silver and Black parts are super-hard coated. Gold and Rose Gold are not.
• Glass: Sapphire (Pre-installed on cases)
• Weight: 154g (Full Links with Module Installed)
• Weight: 70g (Case with Module Installed)
• Weight: 22.4g (Rubber Band with Buckle)
• Case Diameter: 42.2mm (Without Buttons)
• Thickness: 13mm (Before Assembly)
• Wrist Circumference(Rubber): 14cm - 21cm
• Wrist Circumference(Bracelet): 16cm - 21cm
• Individual Link Length: 1.05cm (3$ per piece)
• (Extra links purchase from this listing)
• Lug to Lug: 45mm
• Lug Width: 18mm

          COMPATIBILITY:

• Casio AE-1200/1300 Series Modules
• Casio WS-1600/1700 Series Modules
• Casio DW-291H Series Modules

Why the more expensive price of this custom-made listing's products?

• For Customized "Case & Bracelet"

Because the standard colorway variants are our main production.

They came assembled for fast dispatch of such orders when placed.

But it also meant that when a custom-made order decided to do a unconventional build,

Say, silver case/silver bezel/black buttons. We will have to extract a set of buttons from a assembled case.

Therefore extra time and labor were spent in and leaving a incomplete case. Hence, this pricing.

• For Customized "Completed Build"

Same, like we mentioned above. For "Completed Build",

we will use our own supply of watches and extract module or panel inside.

To unconventional builds, meaning, combining panel from one model and module from another.

We will have to separate them from their original set, leaving a single module or panel by itself.

Unless these left-over parts are requested in upcoming custom-made orders,

then they have no use but collecting dust at our place. 

Moreover, fees do not just contain our labor, it also reflect in some particular model's pricing.

Not all model of AE-1200/1300 have the same pricing. Especially AE-1200WHD-7A.

We don't have this model on our stock anymore. When requested, we will purchase one new.

For a brand new AE-1200WHD-7A, it goes for almost 45$ now. 

Plus, it's more difficult when shipping to export while attaching the caseback. For its content written on top.

Hope you can understand the pricing we chose to make. 

Attentions:

This product is only compatible for Casio AE-1200/1300 Series.

Hence, please check for the make and model thoroughly before purchasing.

Also, please note that any customized merchandise by SKXMOD are not returnable.

[Case Only] and [Case & Bracelet] option do not include caseback and module.

Please prepare your own AE-1200/1300 series caseback.

However, [Completed Build] option does include caseback and module.

The build is matte finished by default unless stated otherwise in the remarks during checkout.

Same applied to module and screen in [Completed Build] option.

If not stated otherwise, default setup would be AE-1200 Type-A module and grey screen.

Super-hard coating is limited on silver and black colored parts. Gold and Rose Gold parts are not.

Due to the originality of it, the order processing and assembly time might take longer than expected.

Depends on the difficulty, it will range from 1 to 2 working weeks till finishing.

Shipping label will be created first. Meanwhile, please be patient with the process. 

Lastly, except for quality issues, customized orders are not allowed to refund or return.

Unless stated otherwise, bracelet and pin buckle color follows the mid-case's.

The harden surface only prevents daily minor bumps and scratches from forming.

Does not mean it can withstand impact, puncture, slashes or substantial force in similar form.

Also, because its unique properties, it will look a bit dimmer after long term using.

For its matte surface collecting dust during the wearing.

Same to the matte bracelet. Hope you can understand.

There will be a dummy caseback attach to casing in the kit.

As a protective layer also to prove the screws can be successfully attached.

A measure to many customers reckless installing without following our instructions.

Therefore lead to broken screws and render the kit useless. Which we do not hold responsibilities. 

Please carefully uninstall it and attach either SKXMOD or original caseback back on.

Please do not use excessive force onto bracelet screws.

If you encounter certain resistance during process of loosening.

Then please do not go further and strip the slot on top.

Instead, slightly warm up the links to dissolve adhesive inside.

Use push pin to nudge the other end of screws a bit by bit.

Only then to continue the screw loosen maneuver.

(There might be slight color difference among different accessory and case under same colorway.)

(Due to many variating factor: manufacturing method, material, design and more.)

(Also factor in that we make our own spray painting. Please take into consideration.)

(The term of "Gold" and "Silver" merely represents the colorway.)

(Not meaning coated or made out of true precious metal.)

(Necessary tools and parts are included in the packaging)

This product is not manufactured by Apple, Seiko, Casio or related brands.

It is made by SKXMOD.

A third-party product to accessorize aforementioned brands and more.