Modding Kits for A168 & F-105W Series

Please note that one way or another, you have to attach a faceplate on the kit.

Because the original one is unremovable. Hence you cannot transplant that.

Unless you like the look of naked module. That is of course your right. 

And text on faceplate is without any branded logo.

Also existing texts are not removable or able to edit. 

       PRESENTATION:

          SPECS:

• Case Material: 316L Stainless Steel (Buttons Pre-installed on Cases)
• Bronze Alternative:
• Case and Button Material: CNC milled CuSn8 Bronze (Buttons pre-installed)
• Caseback Material: 316L Stainless Steel (Optional)
• Bracelet: 316L Stainless Steel (Milled Clasp)
• Coating: IP Coated, Rated over 980HV on Vickers Hardness Test (Bracelet: Also Coated)
• Coating Colors: Only Silver and Black parts are super-hard coated. Gold and Rose Gold are not.
• Glass: Sapphire (AR coated below)
• Weight: 36.6g (Case with Module Installed)
• Weight: 96.9g (Full Links with Module Installed)
• Weight: 30.3g (Bracelet with Full Links)
• Weight: 55.7g (Rubber Band with Module Installed)
• Weight: 19.1g (Rubber Band with Buckle)
• Weight: 4.5g (SKXMOD SS Caseback)
• Case Diameter: 33.8mm (Without Buttons)
• Thickness: 8.1mm (Before Assembly)
• Thickness: 10.2mm (SKXMOD SS Caseback)
• Thickness: 10.15mm (Original Caseback)
• Wrist Circumference(Rubber): 14cm - 21cm
• Wrist Circumference(Bracelet): 16cm - 21cm
• Total Bracelet Length: 18.5cm (8 links detachable)
• Individual Link Length: 0.66cm (3$ per piece)
• (Extra links purchase from this listing)
• Lug to Lug: 39mm
• Lug Width: 18mm

          COMPATIBILITY:

• Casio 1572/3298 Modules
  
• Casio A168 Series Modules
• Casio F-105W Series Modules

Attentions:

This product is only compatible for Casio 1572/3298 Modules.

As in, currently the Casio A168 Series and F-105W Series watches.

Hence, please check for the make and model thoroughly before purchasing.

Buttons are pre-installed by default, if you want to customize them as well.

Please contact our customer service first. Or we will proceed by order's default status.

Presented module is not included. Please use either original or SKXMOD caseback/module on the kit.

Same to the presented parts, it is only for your purchasing references. Not the actual product you will get.

Super-hard coating is limited on Silver and Black colored parts. Gold and Rose Gold parts are not.

Customization will take longer time than expected.

Depends on the difficulty, it will range from 1 to 2 working weeks till finishing.

Shipping label will be created first. Meanwhile, please be patient with the process. 

Lastly, except for quality issues, customized orders are not allowed to refund or return.

The harden surface only prevents daily minor bumps and scratches from forming.

Does not mean it can withstand impact, puncture, slashes or substantial force in similar form.

Also, because its unique properties, it will look a bit dimmer after long term using.

For its matte surface collecting dust during the wearing.

Same to the matte bracelet. Hope you can understand.

Please do not use excessive force onto bracelet screws.

If you encounter certain resistance during process of loosening.

Then please do not go further and strip the slot on top.

Instead, slightly warm up the links to dissolve adhesive inside.

Use push pin to nudge the other end of screws a bit by bit.

Only then to continue the screw loosen maneuver.

For bronze alternative:

Rubber band's buckle is default matte black when purchasing with bronze case.

Or other finishing/color as you requested, but do notified us before or at purchase.

Otherwise we will still match the band with default matte black buckle. 

Please avoid using chemical solution to accelerate patina forming and removing.

For it might deform or corrode the gaskets within buttons under accidental or improper procedures.

Or further more, ruining the bronze material permanently.

And in such sitaution, we are not responsible for the product's after-sales service.

For possible patina formed during transportation.

You may try using coke or ketchup to let the case fully submerge.

Till the surface stain or marks are removed. Or to a degree you satisfied.

But don't forget sealing if off with installing caseback first.

Afterwards, wash off excess material under running water.

There is also a method using baking powder and lemon juice to create a paste.

Then use a toothbrush to brush off any patina you don't want.

To have a fresh start to cultivate new patina at any given moment.

Mind that this is not a defect, patina is a natural reaction for this particular case material. 

And if you are worried or does not like the effect, please do not purchase.

Because it WILL have patina forming one way or another at certain point.

(There might be slight color difference among different accessory and case under same colorway.)

(Due to many variating factor: manufacturing method, material, design and more.)

(Also factor in that we make our own spray painting. Please take into consideration.)

(The term of "Gold" and "Silver" merely represents the colorway.)

(Not meaning coated or made out of true precious metal.)

(Necessary tools and parts are included in the packaging)

This product is not manufactured by Apple, Seiko, Casio or related brands.

It is made by SKXMOD.

A third-party product to accessorize aforementioned brands and more.